K1C Unibody Riser – Bản Lề Cứng Cáp Hơn (Stronger Hinges)

A slightly stronger version of the original K1C Unibody Riser Hinge, using bolt and nut. Feel free to edit on my Tinkercad.

HOW TO BUILD

PARTS LIST

These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍

• (4X) M3*8 Screws

• (2X) M5*25 Screws

• (2X) M5 Nuts

• (2X) M5 Washers

• VHB Tape

PRINT SETTINGS

Mostly follows the original.

• 0.2mm layer height, 25% gyroid infill.

• Rotate beam 45 degrees and lay flat.

• Both hinges can be laid and printed flat.

• A little bit of supports for the screw holes will be nice.