Skip to main content
F3D
Multitool Lock Pick 9 trong 1 (9 in 1 Multitool) 1

8 images

Large file collection DIY

Multitool Lock Pick 9 trong 1 (9 in 1 Multitool)

By EON_2632549

Downloads
4,765
Likes
2,151
Views
29,248

Files 21 4.7 MB

  • Upper_2mm_1767244458.stlSTL · 51.1 KB
  • Lower_Low_Tolerance_1767244459.stlSTL · 748.6 KB
  • Lower_2mm_Tight_Tolerance_1767244460.stlSTL · 934.3 KB
  • Nut_Low_Tolerance_print_2_1767244461.stlSTL · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Choose 9 attachments to print and assemble this multitool.

Print Lower, Upper, 2 Nuts, and 9 spacers.

The nut is hard to screw on with hand, use a tool if possible.

  • Print threaded parts in high-quality settings. (i used 0.16mm layer height)
  • Print with part solid. About 5 walls or do 100% infill
  • The spacer is small,  ARACHNE wall generator worked for this part
  • Use stiffer materials such as PLA, PLA-CF. 
  • ABS or PETG are more flexible, which is bad for printed lock picks.

Assembly Instruction:

  • Place a 1mm thick tool on one end of the first rod
  • Place a spacer (1mm thick too) on the end of the second rod
  • Repeat until 9 tools and 9 spacers are used up
  • Place Upper part on and screw nut if needed (The lid can be press fitted without nut)

Slim 6 in 1 lock pick:

https://www.printables.com/model/1138102-lock-picks-slim-6-in-1

Check out OTF Pick, Lock Pick Tensioners, Rake, and Notch Decoder too:

https://www.printables.com/model/1112320-otf-lock-pick

https://www.printables.com/model/1103439-lock-pick-tensioner

https://www.printables.com/model/1110171-rake-lock-pick

https://www.printables.com/model/1105728-lock-notch-decoder

Read more Show less

Print spec

Formats
stl
Model files
21
Total size
4.7 MB
Largest file
1.1 MB

0 comments

See all