Mod Camera ESP32 cho CORE One

This mod provides an affordable alternative to the Buddy3D Camera by Prusa, allowing you to integrate an ESP32 Camera into your setup. It follows the design of the Buddy3D Camera and is optimized for easy mounting and use.

The main advantages of this mod:

• Available now – no need to wait for an official release
• Costs approximately 20€
• Requires only three 8x3mm magnets
• Compatible with the ESP32 Camera module Reichelt Link
• STEP Files included in case you have a different ESP Cam

HARDWARE needed:
For this mod, you will need:

• 3x 8x3mm magnets
• 1x ESP32 Camera module

PRINTING and FILAMENT:

• Recommended filament: PC-Blend for durability
• some supports needed
• Layer height: 0.2mm

ASSEMBLY

• For ESP Setup folow the Prusa Instructions
• Insert the ESP32 Camera module into the printed mount
• Place the 8x3mm magnets into the slots on the backplate 
• Snap into the Core One Corner
• Connect the USB-C Cable
  For Cable Management you can folow the Path and Instructions for the Door Sensor
  Prusa Instructions How to replace the door sensor – CORE One

I hope you find this mod useful! Let me know your feedback, and feel free to ask any questions.
 

If you want to support me, don't forget to like and download the files! If you really want to support me, you can tip me HERE.