Skip to main content
F3D
Ryobi Deep Tác động tốt lưu trữ ổ cắm 1

3 images

DIY

Ryobi Deep Tác động tốt lưu trữ ổ cắm

By GudmundurThor_239801

Files 2 2.2 MB

  • Ryobi_Socket_Holder_Ryobi_Socket_Holder_rev2_1767005697.stlSTL · 1.1 MB
  • Ryobi_Socket_Holder_Ryobi_Socket_Holder_4mm_hex_rev2_1767005698.stlSTL · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#18558
Category
DIY
Published

Description

Since I would most definitely loose these sockets about 12-15 minutes after purchase I needed somewhere to store them, and what better place than underneath the tool that uses them. So this piece fits on to the great Ryobi 18v Toolholder by Super7 and clips on to my impact driver.

There are 2 versions, one for M4 threaded inserts and one for M4 hex nuts. I use the threaded inserts from CNC Kitchen and the hole is sized accordingly.

There are a number of holes for 6x2mm magnets that can be glued in, but I only put in 1 for good measure since the sockets stay in place so far. If they start wearing down the plastic I can add more magnets.

Link to the battery clip part from Super7:
https://www.printables.com/model/236613-ryobi-18v-toolholder

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
2.2 MB
Largest file
1.1 MB

0 comments

See all