
Bộ phận in 3D cho Bảng cơ bản và PSU mở rộng
- Downloads
- 11,773
- Likes
- 385
- Views
- 25,182
- Remixes
- 5
- Comments
- 184
Files 7 12.8 MB
- Basic-board_PSU-Complete_0.3mm_PETG_MK3S_2h47m_1765562211.gcodeGCODE · 4.5 MB
- Basic-board_PSU-XP-Complete_0.3mm_PETG_MK3S_3h2m_1766512143.gcodeGCODE · 4.9 MB
- Basic-board_PSU-Delta-Set_1765562156.3mf3MF · 562.1 KB
- Basic-board_PSU-XP-Set_1765562165.3mf3MF · 267.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 5
#0128 Nắp Basic Board cho Original Prusa Enclosure (Thiết kế mới hoàn toàn)ByBuildX · 03/02/2026
Vỏ Bảng Cơ Bản Đa Sắc / Hai Tông Màu - KHÔNG Cần MMU! - Hộp Prusa Nguyên BảnByMike81622 · 12/15/2025
Giá đỡ PSU cho tủ Prusa OriginalByScott_7577 · 03/18/2025
Giá đỡ PSU ngoài cho BLOW 71-224ByLukaszM_332143 · 03/06/2025
Details
- Model ID
- #1854
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
All printable parts for yourBasic Board + PSU Add-on.
Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons
You have the option to print two different holders for two different power supplies, depending on which one you received, please refer to the instructions to select the correct power supply holder
The guide for Basic Board + PSU Add-on is part of the guide for Advanced Filtration System or White LED Strip Add-ons
All of the add-ons and community models can be found here.
Print instructions
You have two options:
- use the pre-sliced G-code and print it on your MK3S+
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 15% grid infill
** Note that print settings are recommended, but you can experiment with your own.
Print spec
- Formats
- 3mfgcodestl
- Model files
- 7
- Total size
- 12.8 MB
- Largest file
- 4.9 MB
184 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-

-

-

-

-

-


