Giá đỡ Cột Starlink gen3 Chuẩn Gắn Cột 28mm

Printed 3D pole mount to mount the Starlink V3 dish to a 28mm pole. Can also be used on a light/speaker stand, like this one: https://www.thomann.de/nl/stairville_bls315_pro_lighting_stand_b.htm

Settings I used for printing on Creality K1 on max speed with Hyper PLA:

• Layer height: 28mm
• Wall thickness of 3
• Infill 15%
• With support, but minimal density

For everyday use I think ABS is better. I use it mainly for on the go.