Bộ Tua Vít Mạnh Mẽ

parts required  2x 3/16" washer (1.2mm height)

Compact reinforced driver with storage for six 1/4" hex bits.

Printing Notes

Brim is recommended when printing the cap, as it only a small amount of contact the print bed.

If the bit is too loose and falls out, you can try to magnetize the reinforcing washers.

You can check out my other prints at https://www.prusaprinters.org/social/76585-highrise-workshop/prints.  And don't forget to click the “Like” button.