Bambu Lab A1 Series - Kẹp Ống PTFE & Dây Cáp

Hello Everyone

I designed clips that connect the PTFE tube and the cable going from the X axis to the print head. Thanks to the stiffness of the PTFE tube, it supports the soft silicone cable, which hung limply and, when printing high, could get tangled in the Z axis. In my Bambu Lab A1 mini printers, I use 2 pieces, but I also use two of my other projects "Bambu Lab A1 Series - Toolhead Cable Guide" and "Bambu Lab A1 Series - X-Axis Cable Guide" that create a complete cable guide system. You will find a link to these projects below. If you only use clips without additional cable routing, I recommend printing 3 pieces for the A1 mini printer and 4-5 pieces for the A1 printer.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

Here you will find all my modifications and accessories for Bambu Lab A1 Series printers : https://www.printables.com/pl/@Damian27/collections/1547024

How to Print ? :

• Material : ANY
• Layer Height : 0.2mm
• Infill : 100%
• Support : No 
• Brim : No