Phụ kiện gắn Pin MicroSD cho Toniebox

This replaces the inner mount for toniebox battery with one that can additionally mount a MicroSD extension slot.  - No glue required!
This is highly helpful if you are working with teddybench or teddycloud:
https://tonies-wiki.revvox.de/docs/wiki/cc3200/microsd-compatibility/#sd-card-extension

It still is kept compatible if you do not mount a microSD extension cable.
 
A compatible bottom cover can be found here:
https://www.printables.com/model/927962

ATTENTION: Remove the SDCard previously to adding/removing the bottom cover - it slightly stands out into the bottom cover for easier removal.

I added a “STOCK-Bottom-Plate.stl” version where the endstop for SDCard-Reader is 3mm more into the back. With this it is possible to continue using the stock bottom cover while the SDCard is inserted. Obviously you will then have to remove the cover every time you need to remove the SDCard. :)

The object is already aligned in print direction.
Due to the objects architecture it is necessary to be printed with supports from build plate enabled.