Adapter Lower M4 cho ASG Scorpion Evo

M4 Lower for the Airsoft ASG Scorpion Evo.

MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018

This also disables the empty mag cut-off

What you'll need:

2x M3x20 screw + nut

2x M3x45 screw + nut OR 3x plastic self-Tapping Screws

2x Ball-point Pen Springs

I made some video assembly Guides:

Lower Assembly     Replacing the Lowers

You'll need to print one lower, a BB Tube, and A Mag Release + Button.
The Selector shims are not necessary, but recommended to quickly get the alignment right.