Klicky Probe cho Sovol SV08 ABL

Here you can find the last version

https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led

After making some tests we found that the klicky docking needs to be adjusted. 

all the test have been made using the upgraded shroud that we made but it will be the same for the stock front cover. 

https://www.printables.com/model/916158-sovol-sv08-cn3d-shroud

Introducing the latest upgrade for your Sovol SV08 3D Printer – the Klicky Auto Bed Leveling Mod! 

Building upon the success of our previous modifications, we're thrilled to present a solution that enhances your printing experience, especially when dealing with high temperatures. and not only. Klicky it is more reliable in any circumstance than any inductive probe and it can uses any printing surface!. 

After listening to valuable feedback from our community, we recognized the need for a more reliable auto bed leveling system. Many users expressed frustration with the stock inductive probe, prompting us to develop a better solution. Enter the Klicky probe – a trusted favorite within the Open Source 3D printing community.

Our implementation of the Klicky probe to the Sovol SV08 is designed to address the challenges faced by users, ensuring smoother and more precise printing, even in high-temperature environments. Say goodbye to tedious manual bed leveling/ baby stepping and hello to effortless, consistent prints.

Moreover, the Klicky probe offers unparalleled reliability in any circumstance compared to traditional inductive probes. Its versatility extends to compatibility with any printing surface, providing you with the freedom to choose the bed material that best suits your needs. With the Klicky probe, you can trust in consistent and accurate auto bed leveling for every print job.

Upgrade your printing game today with the Klicky Auto Bed Leveling Mod by CN3D for Sovol SV08 – because precision and reliability should never be compromised."

Additionally, we're excited to announce that this mod doesn't require new hardware for the toolhead mounting. The only items you'll need to purchase for this upgrade are 8 neodymium magnets sized 6x3mm, 2M3x8 for the Docking + 2 T Nuts and the Omron switch. If you don't already have the Omron switch, you can substitute it with any compatible end stop switch or an old mouse. This streamlined approach makes the upgrade process even more accessible and hassle-free.

Probe BOM:
1x microswitch (the omron D2F-5 or D2F-5L (removing the lever) is recommended), D2F-1 and similar sizes microswitch also work
2x M2x10 mm self tapping
some 6 mm x 3 mm magnets (it ranges from 8 to 10)
2x m3 x8mm screws
2x m3 tnuts

D2F-5
 https://s.click.aliexpress.com/e/_DDer3MX
Magnets
 https://s.click.aliexpress.com/e/_DC6sd0n
D2F-1
 https://s.click.aliexpress.com/e/_DF9kXyn
Screws
 https://s.click.aliexpress.com/e/_DBdNTVD 

If you don't have T-nut you can print it 

https://www.printables.com/model/235483-m3-t-slot-nut-for-aluminium-extrusion

Please have in mind that the base for the Klicky probe it is not ready because we didn't receive our unit yet and this is a WIP 

For the configuration file i will Attached when i will receive my unit because i need to Test it before posting it. 

This design was inspired from the awesome work https://github.com/jlas1/Klicky-Probe

I have attached the CAD so you can play with this as much as you like 

You can support my work here https://www.paypal.me/NDRNADIR all the donations are going to my 3D printing Project. 

You can follow us on

Tiktok 

Youtube 

Facebook