
Phao câu cá
- Downloads
- 121
- Likes
- 25
- Views
- 622
- Remixes
- 0
- Comments
- 0
Files 1 305.8 KB
- Fishing_Float_1767008838.stlSTL · 305.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #182639
- Category
- Thể Thao & Ngoài Trời
- Published
- License
- Standard Digital File License
Description
Just a simple fishing float i designed for someone, it actually printed really well so thought i would upload it. I made the bottom flat to make it easier to print and then just trimmed and sanded it round. There is also a dimple at the top so the model will be solid there to make the hole through, i used a small drill bit but I'm sure just heating a needle would work/
Print settings
Key is to print slow around 60-70% and then lower the speed even more at the top to allow it to print cleanly, on the Prusa i slowed it down to 40% at the top. It is a quick print so doesn't add that much time.
Print in Vase mode and enough bottom layers to allow you to round off the bottom, at a .15mm layer height i did 9 bottom layers.
Mine have all been air tight but could be painted to make sure.
Can try playing with the layer height but i found at around 0.15mm to be best.
I printed mine with a .6mm nozzle but I'm sure a .4 would be fine as well.
Post pictures if you catch anything lol.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 305.8 KB
- Largest file
- 305.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -

-


