Khay Giữ Ly Ghế Zero Gravity

Zero Gravity chair cup holder trays to slide over the frame.

Made a few variations, pick which one suites you best or use the blank F3D file to “roll your own” (make sure to link the original if uploading as a new model please).

Model currently requires a 250MM+ bed size. I plan on working in the near future to try to minimize the model to fit on Ender sized beds but will need to rethink the approach as the 1" depth and diameter of slot is what holds it in place. I may also try to make a ”minimalist" version, but that will be down the line. 

The original version was shelled out on the bottom. This saved about 20 grams of filament on the model itself and just about nothing for print time surprisingly, but then required plenty of supports regardless of which orientation it was printed in. You can now print these files flat on the bottom with no supports. I will post shelled version upon request. Recommended to print in PetG or better for sun/heat resistance. I have printed one in PLA and will report back on how it holds up.

I have added a file named TEST FIT. It shouldn't be needed as this has fit all the brand chairs I've found so far, but if you would like to be sure it will work before printing, print the test fit and make sure it slides over the frame (leg pole thickness is the only concern). I decided NOT to If it doesn't fit on your zero gravity chair or you would like to see something in particular, let me know in the makes and I will try to accommodate when I can. 

Enjoy!

Update: 07/26/2023: Added hexagonized models per request (labeled HEX). Will obviously be better for drainage but expect them to take longer total print time. 

Update: 09/03/2023: Added Drain Holes Variants.