Skip to main content
F3D
Vỏ case Silakka54 không vít (Slim Silakka54 screwless case) 1

6 images

Dụng Cụ Tiện Ích

Vỏ case Silakka54 không vít (Slim Silakka54 screwless case)

By Johnny5iv_3103862

Downloads
704
Likes
40
Views
3,074
Remixes
2

Files 7 33.3 MB

  • silakka54_mcu_right_1766899593.stlSTL · 1.9 MB
  • silakka54_top_bottom_right_1766899594.stlSTL · 6.4 MB
  • silakka54_top_bottom_mcu_left_1766899596.stlSTL · 8.3 MB
  • silakka54_mcu_left_1766899597.stlSTL · 1.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

This remix of the original Silakka54 case has the following differences:

  • case bottom is now solid
  • case top has been integrated into the case bottom
  • case sides walls has been reduced by 50%
  • case walls are now shorter and matches the height of the top plate
  • removed the screw holes and replaced with studs for the MCU cover
  • PCB friction fits into the case
  • MCU cover friction fits into case studs
  • inner frame to support the pcb and top plate for outer edges

You may want to experiment with printing the mcu covers at different angles to get the optimum print quality.

I used the ironing function with ironing speed of 65mm/s and ironing flow rate of 22% with spacing of 0.15 to get a nice top surface finish.

Note: This model currently only fits the AliExpress pcb plates up to v1.2.  The newer v1.3 pcb plates are slightly larger around the MCU controller.

Will be making an updated model to work with v1.3 in future.

Read more Show less

Print spec

Formats
stl
Model files
7
Total size
33.3 MB
Largest file
8.3 MB

0 comments

See all