
Vòi Xịt Tự Động Hunter / Rainbird - Bộ Phận Bên Trong
- Downloads
- 26
- Likes
- 4
- Views
- 506
- Remixes
- 0
- Comments
- 0
Files 4 7.9 MB
- Sprinkler_Cap_1766862187.stlSTL · 1.5 MB
- pop-up-sprinkler-6-inch_1766862188.stlSTL · 2.1 MB
- Pop_Up_Sprinkler_-_4_inch_1766862189.stlSTL · 2.1 MB
- Pop_Up_Sprinkler_-_2_inch_1766862190.stlSTL · 2.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #180337
- Category
- Đồ Gia Dụng
- Published
Description
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough.
I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to ensure a 100% match, reuse the spring and other parts from your sprinkler.
Print with PETG, Nylon, or CF to handle the water pressure.
This was modeled after the Hunter Pop Up Sprinkler - 6 Inch Pro Spray. Threads match for all spray nozzle types.
V2 now has a thicker neck to ensure it's a bit stronger. If leaking from the threads, apply some Teflon tape for added strength.
Can't find a leak in your system? Check out the new Sprinkler cap added!
Threads:
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 7.9 MB
- Largest file
- 2.1 MB












