Bộ Vít & Ê-cu M5 & M10 (In 3D, Ren ISO)

This model includes:

✅ 1x M5 × 0.8 ISO thread screw
✅ 1x M5 nut
✅ 1x M10 × 1.5 ISO thread screw
✅ 1x M10 nut

All parts are designed to be 3D printable and are great for:

Thread calibration (check your printer tolerances)

Mechanical prototypes

Educational purposes

Test fittings

Dimensions

M5 Screw:

Outer diameter: 5.0 mm

Pitch: 0.8 mm

Thread length: ~22.5 mm

M5 Nut:

Outer diameter: ~8 mm

Inner diameter (core): ~4.2 mm

Height: ~5–7 mm

M10 Screw:

Outer diameter: 10.0 mm

Pitch: 1.5 mm

Thread length: ~25 mm

M10 Nut:

Outer diameter: ~17 mm

Inner diameter (core): ~8.5 mm

Height: ~8–12 mm

Print Settings

Layer height: 0.1–0.2 mm

Infill: ≥50%

Supports: Not required

Recommended materials: PETG, ABS, ASA → PLA works but will wear faster

Tolerance tip: You can scale by ±1% if the fit is too tight/loose on your printer

Notes

These parts are intended for functional testing and for tuning your printer to print precise threads.
Not intended for heavy mechanical use or critical applications.

Best results are achieved with well-calibrated extrusion and a fine layer height (0.1–0.15 mm).