Skip to main content
F3D
Mô hình HUMVEE Tỷ lệ 1:32 1

4 images

Xe Cộ - Máy Móc

Mô hình HUMVEE Tỷ lệ 1:32

By hobbyist_engineer

Downloads
106
Likes
20
Views
559

Files 20 2.6 MB

  • Air_Intake_1766682652.stlSTL · 112.4 KB
  • Cab_1766682653.stlSTL · 374 KB
  • Chassis_1766682654.stlSTL · 328.8 KB
  • Dash_Board_1766682655.stlSTL · 5.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Introduction:

This is a 3D printable scale model of HUMVEE, the multi-purpose military utility vehicle designed for US military operations. Designed in 1:32 scale for FDM 3D printing, which offers clean lines, curves, and easy assembly. The model is perfect for display, diorama builds, or collectors of vintage and military vehicles.

Parts to Print:

Print the parts as per the list. Use recommended colors for best results.

Part Name

Color

Quantity

Air Intake

Black

1

Cab 

Color

1

Chassis

Black

1

Dash Board

Black

1

Front Indicator

Red

2

Head Lights

White

2

Hood Hinge Pin

Black

1

Hood_Plain

Color

1

Hood_Ridged

Color

1

Rear View Mirror

Black

2(mirrored)

Rim

Color

4

Roof

Color

1

Seat

Black

4

Steering Rod

Black

1

Steering Wheel

Black

1

Tail Light Shell

Black

2

Tail Light

Red

2

Tire

Black(TPE)

4

Position the parts in slicing software with orientations shown in the following images. Correct orientation is important for printing without additional support.

Color Parts: 

Black Parts: 

The model is designed for printing with a 0.4 mm nozzle and requires no additional support. Use the printer-specific settings for the best quality prints.

Layer Height: 0.2 mm

Infill: 10–20% is sufficient for most parts

Supports: Not required. Orient the parts as shown in the images above.

Material: PLA recommended;

Bed Adhesion: Brim for Hood and Roof.

Post-Processing:

The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. You may require the following tools as per preference and availability:

  • Cutter or Knife
  • Sandpaper or Small Files
  • Adhesive (SuperGlue)

Assembly Instructions:

Watch the following video instructions for assembling the model. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. Many of the joints in this design require adhesive for a firm joint. Take necessary caution while assembling.

Read more Show less

Print spec

Formats
stl
Model files
20
Total size
2.6 MB
Largest file
404.4 KB

0 comments

See all