
Vít và Ec-măng M10 (In 3D, Ren ISO Metric)
- Downloads
- 396
- Likes
- 27
- Views
- 850
- Remixes
- 0
- Comments
- 0
Files 3 1.8 MB
- m10x1.5_1766672429.stlSTL · 743.6 KB
- M10_screw_nut_1766672429.stlSTL · 931.1 KB
- Part_Studio_1_-_m10_nut_1766672430.stlSTL · 185.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #177193
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
This model includes a metric M10 × 1.5 ISO thread screw and a matching M10 nut.
Both parts are designed to be 3D printed, and are useful for:
✅ Thread calibration
✅ Mechanical prototypes
✅ Educational purposes
✅ General fitting tests
Dimensions
Screw:
- Outer diameter: 10.0 mm
- Thread pitch: 1.5 mm (ISO standard)
- Thread length: ~25 mm
- Head diameter: variable — depending on design
- Total height: depends on your model (check STL)
Nut:
- Outer diameter: ~17 mm (typical, may vary by model)
- Inner diameter (thread core): 8.5 mm (for M10 × 1.5 thread)
- Height: customizable
Print Settings
- Layer height: 0.1–0.2 mm
- Infill: ≥50%
- Supports: Not required
- Recommended materials: PETG, ABS, ASA — PLA may wear out faster
- Tolerances: Ensure your printer is well-calibrated; you may scale by ±1% for optimal fit if necessary
Notes
This is a functional test model. It is not intended for high-load applications or permanent fastening.
For best results, use 0.1–0.15 mm layer height for fine thread detail.
The M10 screw and nut were modeled using the standard ISO parameters — however, as STL export and slicer tolerances vary, always check fit before using in functional assemblies.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.8 MB
- Largest file
- 931.1 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-
New

