Skip to main content
F3D
Bộ phận nối dài cho van túi hút chân không 1

8 images

Máy In 3D

Bộ phận nối dài cho van túi hút chân không

By possebaer

Downloads
203
Likes
29
Views
1,776

Files 1 913.9 KB

  • SaughilfeStaender.stlSTL · 913.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#176537
Category
Máy In 3D
Published

Description

When putting a filament spool inside the vacuum bag, it is often difficult to press the vacuum pump against the valve if the spool is large/or wide. It is easier if there is a higher counterpart, and this model provides this. 

It was tested with very wide spools (75 mm) and also with narrow spools. Check your spool, if it is narrower than that you may be able to scale it down in z-axis or cut it down in your slicer, as it could be unnecessary big otherwise (but would work still). See also the comment section for the feedback about size. 

I also use those great things inside the vacuum bag: https://www.printables.com/de/model/361327-suction-help-for-vacuum-pump – this model was designed large enough for those  vacuum suction helpers.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
913.9 KB
Largest file
913.9 KB

0 comments

See all