Biển Báo Thanh Trượt - Trống

See also the “text included” version of this model here :

https://www.printables.com/model/32738-slider-sign-onoff-inout-yesnohttps://www.printables.com/model/32738-slider-sign-onoff-inout-yesno

With the full release of PrusaSlicer 2.6 and the ability to easily add text to a print, I thought it would be useful to make “blank” versions of some of the signs I have previously made, so that other people can customize them with text of their choosing.

When adding text to the base section of this sign, keep in mind that the “clearance” for the slider is 1.6mm, so use a smaller text height (I suggest a text height of 1mm or less).

Print Instructions

The prints are designed to print the text in a contrasting color using two color printing with filament switching. This works very well with a dark color as background and a "metallic" color for the text; a gray or black background with white text also work well (see the photos for the original version of the sign).

Print in PLA with 10% rectilinear infill.

The sign base and the slider are printed separately. The slider simply snaps into place, but getting it inserted can be a bit tricky. I recommend using this technique:

Hold the sign base upside down at at angle, with the slider inserted into one slot. Push down with your thumbs to bend the base slightly along the long axis, while pushing the slider into the other slot at the same time. Once the slider snaps into place it should slide easily.

CAD

The OnShape 3D CAD files for this are available here:

https://cad.onshape.com/documents/979b26e885838d93a9785bed/w/b3fad08a36cac413f18a2f9e/e/c7964ac9324332973aa87196