
Súng Đồ Chơi Bắn Đạn Nhựa (Truy cập Beta)
- Downloads
- 184
- Likes
- 31
- Views
- 2,335
- Remixes
- 0
- Comments
- 0
Files 8 4.5 MB
- Fire_Pins_1766393178.stlSTL · 399.6 KB
- Blaster_with_darts_4_1766393179.stlSTL · 13.9 KB
- Main_right_1766393180.stlSTL · 90.1 KB
- Main_left_1766393181.stlSTL · 90.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #173828
- Category
- Máy In 3D
- Published
Description
A cool fidget I made its simple and crappy but the first real modeling project I've done, Just a heads up you do need a bullet shell I'll eventually I will design one for you to 3D print but for right now here's a link to buy them. https://www.amazon.com/Pistol-Bullets-Bullet-Portable-Storage/dp/B0CXHXGP6K?th=1
The model comes with 2 pins, long pin for if you want to add spring, And short for with out spring, I don't have recommendations for spring's yet that's for you to test.
Directions
-
You will have to sand all the pieces down before assembly but make sure to leave the bevel at the end of the barrel untouched.
-
If you are using a long pin put a spring in the middle of the piece.
-
place Pin in the Pin slot with tiny needle like tube going threw hole and then snip the extra sticking out of small hole.
- place barrel into front barrel slots with bevel end facing away from the blaster.
- now set trigger ring onto the trigger peg and sand it down until flush with the rest of the blaster.
- Now Ounce you've done all that put super glue on every thing highlighted and shut it with other half like a sandwich. (Watch out for all the moving parts) And this means you know are finished just load the 3d printed darts into the shell (Not included) and slide them into the barrel and pull back gently on the ring to fire.
Parts, Material's, And Settings
- Made with PLA
- Spring Optional
- Temperature depends on your material I recommend for PLA bed 60 C and Nozzle 205 C
- Supports are absolutely needed
- Layer height 0.2 mm
- Super Glue needed
Link to Tinkercad Project make sure to give credit if remixed
https://www.tinkercad.com/things/2KIgGUv1Feq-blaster-with-darts
want to buy the blaster I modeled this from
And please excuses my poor artistic skills.
Print spec
- Formats
- stl
- Model files
- 8
- Total size
- 4.5 MB
- Largest file
- 2.2 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-
New -

-

-

-

-

-


