
Ikea Lack V2 - Các biến thể chiều cao +10mm-100mm
Remix of Tủ chống ồn Prusa V2 - Phiên bản MMU2S By OndrejStritesky
- Downloads
- 127
- Likes
- 34
- Views
- 859
- Remixes
- 0
- Comments
- 0
Files 41 4.6 MB
- UpperCorner_BR_10mm.stlSTL · 134.8 KB
- UpperCorner_FL_10mm.stlSTL · 132.5 KB
- LowerCorner_BL_10mm.stlSTL · 42.1 KB
- UpperCorner_BL_10mm.stlSTL · 134.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #173633
- Category
- Máy In 3D
- Published
Description
Presenting a revamped iteration of the original Prusa Enclosure V2.
Apart from the corners nothing has been changed.
No need to change any fasteners.
You can support my work and buy me a coffee here: Buy me a Ko-Fi!
It helps more than you know!
All other parts for the Ikea Lack V2 Enclosure can be found here: https://www.printables.com/model/3673-prusa-enclosure-v2-mmu2s
Notable Enhancements:
Each corner of the enclosure has been redesigned to offer a selection of heights, facilitating effortless adjustment to suit your preferences.
Both lower and upper corners now come in various versions ranging from +10mm to +50mm. This versatility allows you to easily select the desired enclosure height to accommodate your printer or any additional accessories.
For a modest increase of 10mm, simply choose the corresponding variant of either the upper or lower corner set, while retaining the original corner pieces for the opposite set.
For a more substantial increase of 100mm, seamlessly incorporate both the upper and lower 50mm sets.
Magnets:
The original size was a bit tricky to find. But I did find a suitable alternative.
20x5x2mm
You can buy them on amazon here: https://amzn.to/42RKn2B
Fasteners:
I bought these two sets of M3 bolts quite a while back and ain't even close to running out.
https://amzn.to/3OV3RxE (Button head cap)
https://amzn.to/3OSmJ0j (Sockets head cap)
Here's a table of the needed size of whatever material you want to use
Adjustment
Side Panel Dimensions (3x)
Door Panel Dimensions (2x)
+10mm
440×483×3mm
220×505×3mm
+20mm
440×493×3mm
220×515×3mm
+30mm
440×503×3mm
220×525×3mm
+40mm
440×513×3mm
220×535×3mm
+50mm
440×523×3mm
220×545×3mm
+60mm
440×533×3mm
220×555×3mm
+70mm
440×543×3mm
220×565×3mm
+80mm
440×553×3mm
220×575×3mm
+90mm
440×563×3mm
220×585×3mm
+100mm
440×573×3mm
220×595×3mm
Just a schematic on the filenames to avoid any confusion.
If anyone is planning on buying any glass with a certain height dimension.
Let me know and I can adjust the height and at it for you.
Print spec
- Formats
- stlzip
- Model files
- 41
- Total size
- 4.6 MB
- Largest file
- 812.6 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-

-

-

-

-

-


