Skip to main content
F3D
Ốp Lưng iPhone 17 Pro - Thiết Kế Tối Giản 1

4 images

Dụng Cụ Tiện Ích

Ốp Lưng iPhone 17 Pro - Thiết Kế Tối Giản

By 3dPrintDesigns

Downloads
240
Likes
6
Views
581

Files 2 2.5 MB

  • A_Cover_iPhone17ProMinimal_1766379535.stlSTL · 1.1 MB
  • B_Cover_iPhone17ProCameraProtection_1766379536.stlSTL · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Project Description

Secure your new iPhone 17 Pro immediately with this custom, high-precision 3D printable case featuring a sleek, minimalist aesthetic!

This protective case is precisely modeled on the latest design specifications (Accessory Design Guidelines) to guarantee a perfect, snug fit around the large triple-camera module and all new ports of the iPhone 17 Pro.

The case wall thickness is set at 1.4mm, offering an ideal balance of strong impact protection and a minimal, pocket-friendly profile.

I have included two distinct files to let you choose your level of camera protection:

Minimalist (No Supports): Perfect for a clean print. It features a large, open cutout for the camera module, providing quick access and leaving the module visible while still offering raised protective edges (lips).

Camera Protection (Requires Supports): Includes comprehensive coverage for the entire camera module, with precise cutouts only for the three individual lenses, shielding them from dust and direct bumps.

Critical Protection: The case features a crucial protective lip (raised edge) of approximately 0.8 mm - 1.0 mm around the screen, ensuring the display is protected when placed face down.

Printing Details and Settings

This design is optimized for maximum durability using rigid, heat-resistant materials.

Setting

Recommendation

Rationale

Material

ASA (Recommended for superior heat/UV resistance) or PETG

ASA is best for durability against sun/heat (e.g., in a car). PETG is an excellent strong alternative.

Wall Thickness

1.4 mm

Provides rigid protection while keeping the case manageable.

Layer Height

0.20 mm

Good balance between print speed and detail for ports and buttons.

Perimeters (Wall Loops)

4

Crucial: Ensures the 1.4 mm wall thickness is completely solid for maximum strength.

Infill (Density)

0%

Structural integrity comes from the 4 perimeters; infill is unnecessary.

File A: Minimalist Version (No Supports Recommended)

Supports Needed: NO. Print flat on the build plate.

File B: Camera Protection (Supports Required)

Supports Needed: YES. Supports are only needed from the build plate to support the overhangs inside the camera lens holes.

Slicer Setting: Use "Supports on build plate only."

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
2.5 MB
Largest file
1.5 MB

0 comments

See all