Ốp Đèn Trà Nến 12 Con Giáp

Free models of all of Chinese Zodiac as Tealight Covers

Mainly made for a celebration of the Lunar New Year

Tealights are with an animal names in english (inside, in the middle) for easier identification

Some hanzi are in simplified (SIM) and traditional (TR) chinese versions

There are also test files with heads from the full set of tealight covers

Tested on PLA prints
No deformations were noticed (nor in walls nor in the bottom) but there can be some if you will use bigger candles - be advised

Still I'm recommending a LED candles instead of real ones- as I used it

---

Full set of Chinese Zodiac Tealight Covers (more than 370 tealight versions) is on Printables:
https://www.printables.com/model/1514080-chinese-zodiac-tealight-covers-full-set

All of Chinese Zodiac Models in my collection (tealight covers and bookmarks) on Cults3D
https://cults3d.com/en/design-collections/c47/chinese-zodiac

If you want some design from Cults to be on Printables let me know

Sets with each zodiac (alphabetical order)

Dog ~2030
https://cults3d.com/en/3d-model/various/year-of-the-dog-tealight-covers

Dragon ~2036
https://cults3d.com/en/3d-model/various/year-of-the-dragon-tealight-covers-set

Goat ~2027
https://cults3d.com/en/3d-model/various/year-of-the-goat-tealight-covers

Horse ~2026
https://cults3d.com/en/3d-model/various/year-of-the-horse-tealight-covers

Monkey ~2028
https://cults3d.com/en/3d-model/various/year-of-the-monkey-tealight-covers

Ox ~2033
https://cults3d.com/en/3d-model/home/lunar-new-year-tealight-covers

Pig ~2031
https://cults3d.com/en/3d-model/various/year-of-the-pig-tealight-covers

Rabbit ~2035
https://cults3d.com/en/3d-model/various/year-of-the-rabbit-tealight-covers-set

Rat ~2032
https://cults3d.com/en/3d-model/various/year-of-the-rat-tealight-covers

Rooster ~2029
https://cults3d.com/en/3d-model/various/year-of-the-rooster-tealight-covers

Snake ~2025
https://cults3d.com/en/3d-model/various/year-of-the-snake-tealight-covers

Tiger ~2034
https://cults3d.com/en/3d-model/various/year-of-the-tiger-tealight-covers-set

---

Made in Blender 3D

---

Print Settings

Models are made for 0.4mm nozzle
No supports needed
2 walls
20% Gyroid infill (it's used just for a base)

Recommended layer height 0.1-0.2mm

Printed with PLA

If you want a diffused light on the pattern (romboidal holes) merge the model with Ch_Addon_Diffuser
It will also be easier to print then
You can see the difference in the models list and some photos

---