New
SolderMate - Fully 3D Printed Desk Soldering Companion
ByleonicLikes0Downloads1.4K
DIY
Hộp In 3D Cho Heltec V4 (GPS)
- Downloads
- 450
- Likes
- 54
- Views
- 2,507
- Remixes
- 1
- Comments
- 0
Files 1 716.3 KB
- Heltec-Wifi-lora32-V4-WK-GPS_1766180871.3mf3MF · 716.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #168040
- Category
- DIY
- Published
Description
- To obtain commercial rights to this model, please contact the original designer.Unauthorized printing, selling, or commercial use without prior consent will result in legal action.
- This 3D-printed case is specifically designed for the Heltec WiFi LoRa 32 (V4), and this version supports the installation of a GPS module.
- It includes a 3000mAh battery, an antenna, and the WiFi LoRa 32 (V4) PCB board.
- The 3D-printed case will be optimized and updated from time to time.
- Three M2.5 × 8 self-tapping screws are required for installation.
- You’re all welcome to print this case! I put a lot of effort and thought into designing it. As a beginner in 3D modeling, I truly appreciate any feedback or suggestions you might have. Feel free to message me directly or leave a comment — your support means a lot to me.
- Friendly reminder: when installing the antenna, make sure to tighten the screws securely. There’s a small design flaw in this part, but I’ll update the model once I find a solution.
- Using the print settings shown in the image above will make it much easier to remove the 3D printing supports.
- WiFi LoRa 32(V4), ESP32S3 + SX1262 LoRa Node, Meshtastic and LoRaWAN Compatible – Heltec Automation
- GT-800 902-928, 915 MHz Whip Antenna (SMA) – Heltec Automation
- Heltec 3.7V Lipo Battery 3000Mah PL103665 Lithium Battery Li Polymer Batteries for T114 V2 LoRa 32 V3 Dev-board LoRa Node 1Pc - AliExpress 44
- https://heltec.org/project/l76-gnss-module/
Print spec
- Formats
- 3mf
- Model files
- 1
- Total size
- 716.3 KB
- Largest file
- 716.3 KB
0 comments
You may also like 12 models
See all-
-
Còi Tàu Hơi Nước Mini
ByfifindrLikes500Downloads4K -
Dụng cụ Khui & Nắp Đậy Lon Nước Ngọt
ByVC_DesignLikes679Downloads3.6K -
Dụng cụ mở hộp nhỏ gọn | Dao cắt thùng carton an toàn in 3D
ByDan Schwartz SchwartzLikes744Downloads3.4K -
Bộ kẹp chữ C từ 1 đến 5 inch - Kẹp C cứng cáp, bền bỉ
Bychubbs8697_2027893Likes585Downloads1.7K -
Dụng cụ 3D in hỗ trợ tìm và đánh dấu tâm cạnh gỗ (Center Finder)
Byquibeck_3353173Likes965Downloads1.9K -
Dụng cụ mở thùng carton công thái học - Mẫu in 3D tiện dụng
ByRungeKuttaLikes229Downloads1.2K -
Bộ kẹp giữ 2 đầu vít cho máy khoan và máy vặn vít DeWalt
ByEadubsLikes228Downloads1.3K -
Nắp đậy ống Silicone
ByJeremyVillalo_760366Likes68Downloads767 -
Bộ sưu tập 11 nhân vật mô hình Mecca Chameleon in 3D vui nhộn
ByZED4EverLikes313Downloads5.2K -
Dụng cụ xỏ dây cạp quần Pajama
Bykjus_448782Likes314Downloads673 -
NewScrew-Driven Pulling Gripper
ByelitailLikes0Downloads128
