Skip to main content
F3D
Máy bắt kẹo Candy Claw trong tầng hầm của Chris
Large file collection Đồ Chơi

Máy bắt kẹo Candy Claw trong tầng hầm của Chris

By ChrisRiley

Downloads
290
Likes
178
Views
8,043
Remixes
1
Comments
10

Files 63 8.6 MB

  • Center_box_nut_x1_1766450164.stlSTL · 9.7 KB
  • box_trap_2_x1_1766450165.stlSTL · 6.3 KB
  • box_left_trap_x1_1766450165.stlSTL · 6.5 KB
  • Well_Cup_x1_1766450166.stlSTL · 35.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This is a working candy claw machine that has many 3D printed parts. We shared this at ERRF 2022. Have a look at what it does here:

https://youtube.com/shorts/K-8PsoMRIVw

Note: Watch the different model files, you don't need to print them all. Some are longer parts that have been split so they are easier to print. Some are 3MF versions of the of the same file that have added supports.

Print setting, all parts are printed on PLA other than the files marked with PETG and TPU.

PLA parts, all parts are printed with 2 walls and 20% infill, 0.2mm layer height. Except the base, Only difference on those, I use a 0.3, first layer height. The rest 0.2mm. Larger layer height would be fine as well.

PETG parts, print them with 4 walls, 30% infill and 0.2mm layer height.

TPU, same as PLA. TPU is only used for the feet, can probably be subbed out for PLA or PETG.

The whole project is organized over on github.

https://github.com/brotherchris/Candy_Claw

Link to the BOM on google sheets:

https://docs.google.com/spreadsheets/d/1oqRfN_EaBlO6Y_TgtXuItuPHw5bjrYzdcyXGKV8RCzQ/edit?usp=sharing

Link to the Fusion 360 Render https://t.co/iATtfIBX49

Claw Build Part 1: https://youtu.be/nTH9bbGd_CQ

Read more Show less

Print spec

Formats
3mfstl
Model files
63
Total size
8.6 MB
Largest file
822.3 KB

10 comments

See all