Skip to main content
F3D
Các bộ phận Duender Hybrid Có Bánh Xe 1

1 image

Máy In 3D

Các bộ phận Duender Hybrid Có Bánh Xe

Remix of Duender - Chuyển đổi 2 máy Creality Ender-3 thành CoreXY By SergeiIrbene_2885771

By DavidShidele_2443372

Downloads
1
Likes
1
Views
82

Files 11 2.3 MB

  • Higher_X_Mount_L_1766190116.stepSTEP · 205.8 KB
  • Higher_X_Mount_R_1766190117.stepSTEP · 208.5 KB
  • ShortSpacer_1766190118.stepSTEP · 5.8 KB
  • LongSpacer_1766190119.stepSTEP · 5.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#167910
Category
Máy In 3D
Published

Description

When I was putting my DuEnder together, I wasn't ready to commit to buying rails, but I wanted to have the option to do so later....  I looked through the differences, and the only real issue is the height of the belt path, which shifted up due to the placement of the rails...

In order to accommodate that, two changes had to be made:

  1. The X-axis brackets needed to be made taller to move the idlers up

  2. The carriage plate needed to have the belt slots shifted up to match

So that's what I did.  One of the additional benefits is that it creates extra space to allow for up to 48mm long stepper motors for the X/Y movement (and apparently the best motors are that size)

I also added some spacers... one to replace the one that's normally part of the assembly, and the other to add that amount of space to the other idler screw.

This does also require longer screws for the X-axis gantry parts, up to 40 mm for the two screws used by the idlers and 35mm for the rest rather than the 30mm in the base model.

If you'd rather not drill your baseplate, I included a .step file for the carriage plate to have it CNCed... I left the smaller holes at 2.5mm in case you wanted to tap them as M3

I also created the following files for the 4040 Extrusion and the Dragonburner Plate Mount

Read more Show less

Print spec

Formats
stepstl
Model files
11
Total size
2.3 MB
Largest file
666.8 KB

0 comments

See all