Kệ giữ chai Multiboard đáy hở nhiều kích cỡ

Multiboard bottle holders with open bottom in sizes from 25mm to 120mm.

The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection points.

Recommended print settings (same as multiboard defaults):

• 3 wall perimeters in wall thickness
• 15% infill
• No supports needed
• 0.2 mm layer height 
• 0.40 mm nozzle
• PLA
   

Notes for the parametric Autodesk Fusion model

 The parametric model includes one of David Ds MultiConnect connectors as a component, this means that you cannot just select File>3D Print from Autodesk Fusion. File>3D Print cannot merge the flask holder to the connector.
To get the entire model ready for the slicer choose File>Export and select .stl in Autodesk Fusion.

Parameters:

• diameter - Flaskholder diameter including tolerance, thus depending on your printer add a tiny marginal to the diameter you want.
• wall - The flaskholder wall thickness.
• height - The flaskholder height. But note that the MultiConnect connector component cannot be resized by this parameter.  
   

Special thanks to Jonathan (KeepMaking) for creating multiboard and to David D for creating the flexible MultiConnect connectors.

Change log:
22-Jul-2024 - Added holders with diameter 42.5, 47.5, 52.5, 57.5, 62.5, 67.5, 72.5 & 77.5

31-Jul-2024 - Updated holders with diameter 42.5, 47.5, 52.5, 57.5, 62.5, 67.5, 72.5 & 77.5 to fix issue where the models bottom wasn't flush with the hanger. 
Thank you for reporting this Derek R.

25-Jan-2025 - Added parametric Autodesk Fusion model.