Tai Mèo Tương Thích WLED

NOT FINISHED JET

This is my Project of making caters who you can eaysly mount in any kind of headphones. Current version uses a vape Battery with 360mah witch lasts ca 2-3h. I plan to build a v2 with a 500mah Battery and proper power management in the future.

Known Problems 

at the moment the ESP with WLED runs really hot (60c) and the Battery voltage (3.7v-4.2v) gos directly to the ESP. And Not all LEDs are visible from the front.

Parts I used

Part I used

Link (Aliexpress)

ESP 32 C3 supermini 

https://de.aliexpress.com/item/1005007479144456.html

1S Typ c BMS

https://de.aliexpress.com/item/1005008815046743.html

(Vape)Battery 

3mm WS2812 LED Strip

https://de.aliexpress.com/item/1005008044808880.html

Software WLED/Self coded alternativ coming soon 

https://install.wled.me

M2 Screws (optional)

https://a.aliexpress.com/_ExkAOoU

M2 inserts

https://a.aliexpress.com/_EHa3Jak

You also need some easy to solder cable and jumper connectors 

There are some different ways to assemble and different versions

Just-rescaled

here you just need to glue the front plate in the housing 

WLED-Version(easy)

Here you stick the ESP and BMS with dublesidet tape together and solder small wire from the ESP to the BMS over the opesidside from the usb port  

WLED-Version(1)