Đèn Noel Quán Bia

It makes your beer garden lights look like old-fashioned Christmas tree lights.

1. Print the bulb in vase mode, when done remove the flat bottom or drill out with a hole saw, so that the light will fit inside.

2. print two of the bulb bases

3. print two clippys, or just use wire ties

4. assemble the base halves around the bulb, letting the wire pass through the openings, with the light hanging down into the bulb.

5. take the two pieces of the clippy and take the piece with the notch and place it in the slot on the side of the base (let gravity be your friend and place it in the downward side such that the hooks hold the halves together.  Then take the other piece (the vaguely triangular one) and force it into the slot above it's other half. OR: just use wire ties threaded through the slots to clamp it together.