Giá đỡ máy đa năng Makita cho Wall Control

This uses the DDD Printable Wall Control System (github) to mount the tool. 

I've designed this using the Makita XMT03Z, but it may fit other similar oscillating tools. The mounting dimensions are 18.2mm wide and 6mm thick which support the shaft on the crank housing.

Use a good percentage infill to keep this rigid, at least 40%.

For the sidepieces, I used the included 1x3 side brackets. Use these 4x10x8mm pins to attach to the mount.

I'd recommend using the locking spacers facing the wall surface, I used   the 3x2 size. This can be used to lock in the mount using the threaded pin.