Skip to main content
F3D
Đế Gắn Phẳng Từ Tính "Khí Động Học" Mini Starlink 1

16 images

DIY

Đế Gắn Phẳng Từ Tính "Khí Động Học" Mini Starlink

By Brul_34002

Downloads
130
Likes
13
Views
880

Files 6 1.3 MB

  • Starlink_Mini-Bed-v4_1766149798.stlSTL · 497.1 KB
  • Starlink_Mini-Bed-v4-cover_1766149799.stlSTL · 14.3 KB
  • Starlink_Mini-Bed-v4_1766149800.3mf3MF · 275 KB
  • Starlink_Mini-Bed-v3_1766149801.stlSTL · 489.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#162425
Category
DIY
Published

Description

The flat bed is ready for mounting magnets with a diameter of up to 88mm/m8 or using the side threaded rods m8 on the roof rack. There is a passage for a cable or for mounting POE from Mikrotik in the back. The entire starlink is covered with 3mm plexiglass/acrylic and secured with 3pcs m3/10mm screws on V3 or one screw and printed lock on v4. There is also a cut model in multiple parts for MK3/4 and a plexiglass laser cutting file for V4.

https://www.aliexpress.com/item/1005005008224956.html

The PoE must be modified by using something on the links (or by replacing the power connector) and the plastic fuse on the RJ45 connector must be shortened to match the fuse on the original cable.

https://mikrotik.com/product/RBGPOE

https://www.aliexpress.com/item/1005008135195516.html

https://www.aliexpress.com/item/4000580845389.html

Use of anything I post is at your own risk.

Read more Show less

Print spec

Formats
3mfstlsvg
Model files
6
Total size
1.3 MB
Largest file
497.1 KB

0 comments

See all