Khay BentoBox cho Qidi X-Plus 3

This BentoBox tray only works for the Qidi X-Plus 3. It relies on resting on one of the edges of the plastic frame. 

Recommendations

• Print with ABS or ASA
• Enable brims
• wall loops: 3 
• 0.4 nozzle
• 100% infill

I used velcro tapes for easier maintenance. 

The additional BentoPlate part is to shim the bentobase higher. Depending on the thickness of the adhesive tape used, this part is optional. I superglued the plate to the BentoBox base. Another reason for the plate is that the area was wrapped when I printed the BentoBox base with ABS.