Skip to main content
F3D
Đế lọc carbon BentoBox v2.0 cho Qidi X-Plus 3 1

3 images

Ý Tưởng Khác

Đế lọc carbon BentoBox v2.0 cho Qidi X-Plus 3

Remix of Bộ lọc carbon BentoBox v2.0 cho máy in Bambu Lab X1C By thrutheframe

By IamBrad_1395486

Downloads
128
Likes
32
Views
1,946
Remixes
1

Files 2 163.2 KB

  • Qidi_X-Plus_3_Base_1765544943.3mf3MF · 109.7 KB
  • Hepa_Short_1765544944.3mf3MF · 53.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Files included in this are modfied version of the base and hepa filter to allow for better placement in the Qidi X-Plus 3. Due to lack of room the filter needs to be at an angle and also drop down below the shelf on the rear housing. I've included flange to allow for attaching the filter base to the self on the rear of the housing. I drilled both the flange and the housing but you could also use double sided tape if you didn't want to drill. 

On my unit I needed to relocate one of the sensors because the wire was too short and it was in the way. 

I did find an unused aux fan socket on the main board that I'm using to power the fan. This is an always on socket so you may want to find a different way of powering the fan. 

All the remaining parts were printed directly from the original files. 

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others

Read more Show less

Print spec

Formats
3mf
Model files
2
Total size
163.2 KB
Largest file
109.7 KB

0 comments

See all