Skip to main content
F3D
Nắp Che Thanh V-Slot 1

4 images

Ý Tưởng Khác

Nắp Che Thanh V-Slot

By jodoll

Downloads
502
Likes
53
Views
1,944
Remixes
1

Files 5 1.1 MB

  • V-Slot_1765779497.FCStdFCSTD · 184.9 KB
  • V-Slot-Cover_1765779498.amfAMF · 11.1 KB
  • V-Slot-Cover_1765779498.stepSTEP · 73.2 KB
  • V-Slot-Cover_1765779499.objOBJ · 76.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This is a snap-in-place cover for V-Slot profiles.

It is optimized to print in vase-mode with a 0.4mm Nozzle. 
It will be strong and flexible enough if you use PETG.
Use a brim for good bed adhesion and if cooling is adequate it should print fine without a minimum layer time.

For different nozzle diameters and other customizations you can edit the .FCstd file with FreeCAD (there's a sheet called “Dimensions” and the Model will auto update if you modify one).

I found that the maximum height that will work with the SUNLU PETG I used is around 80mm, so the model files have this height. Any higher and the part will bend too much during printing, so detail is lost, which in turn results in an imperfect fit to the profile.

Lastly the pre-sliced file is for a Revo Hemera with a 0.4mm nozzle on an Ender 3.

Edit: Looks like @Tascanis_1277847 managed to get good results printing with the front side on the bed, too. I didn't try printing in that orientation, but you may give it a shot. 

Copyright Notice:

The V-Slot profile in the .FCstd file, that was used to derive dimensions, was taken from Creality3DPrinting's GitHub and is licensed under GNU General Public License v3.0.

Read more Show less

Print spec

Formats
amffcstdgcodeobjstep
Model files
5
Total size
1.1 MB
Largest file
750.1 KB

0 comments

See all