Skip to main content
F3D
Giá đỡ Logitech Streamcam có khớp nối (Chỉnh sửa) 1

3 images

Dụng Cụ Tiện Ích

Giá đỡ Logitech Streamcam có khớp nối (Chỉnh sửa)

Remix of Giá đỡ Tripod Logitech Streamcam có Khớp nối By Neoz3d

By scross01

Downloads
196
Likes
29
Views
1,251
Remixes
1

Files 9 2.3 MB

  • Streamcam_Mount_1765548950.stlSTL · 131.5 KB
  • Microphone_Mount_Connector_1765548952.stlSTL · 304.7 KB
  • Nut_1765548953.stlSTL · 123.9 KB
  • Bolt_1765548953.stlSTL · 446.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d

Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design.

  • Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts suitable for manually adjustment of the joint.
  • The camera grip is tapered to fit the Streamcam body better, similar to the OEM grips. 
  • The base of the joint has a female 3/8" 16 UNC threaded connector suitable for many microphone and boom mounts.

Recommended print settings

I recommend printing the parts separately. All parts can be printed without supports.

  • Streamcam Mount - print with 0.2mm layer height and 3 perimeters.
  • Microphone Mount Connector - print with a 0.12mm layer height, or adaptive layers for the threaded base. Orient with the threaded hole at the bottom.
  • Nuts - print 2 of them, with a 0.12mm layer height, or adaptive layers. Use the fuzzy skin option for the outside perimeters for better grip. Orient with the threaded hole at the top.
  • Bolt thread - print with 0.2mm layer height. If the thread is too tight try reprinting with the printers flow rate reduced by 10%.

Read more Show less

Print spec

Formats
3mff3dstl
Model files
9
Total size
2.3 MB
Largest file
468.8 KB

0 comments

See all