Skip to main content
F3D
Vỏ BTT TFT35 SPI V2.1 Cho Voron Switchwire 1

2 images

Ý Tưởng Khác

Vỏ BTT TFT35 SPI V2.1 Cho Voron Switchwire

By Ken226

Downloads
635
Likes
95
Views
3,092
Remixes
1

Files 8 3.9 MB

  • TFT35_SPI_V2.1_Housing_1768351023.stlSTL · 1.6 MB
  • Logo_1768351025.stlSTL · 42.1 KB
  • BezelBase_1768351026.stlSTL · 255.3 KB
  • Bezel_Accent_1768351027.stlSTL · 269.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Details

Model ID
#158282
Published

Description

This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.  The CB1 has the drivers for this display built-in.   

The Screen sits a couple millimeters below the level of the housing face, which allows the bezel's accent insert to cover the electronics traces around the screen perimeter.   The accent insert is printed separately and glued to the screen retainer using a few drops of super glue.  The screen retainer and bezel insert both have locating features, which will help you keep everything aligned while gluing them together.

The screen retainer needs 4 M3x6mm socket head cap screws that thread into the screen retainer from the backside, to secure the screen into the housing.

The little logo insert also is glued in place with a drop of super glue.

The bezel accent insert and bezel base/screen retainer should be printed with a .1mm or thinner layer height.  The housing itself looks good printed @ .2mm layer height.

I included stp files for those of you who like to remix.

Read more Show less

Print spec

Formats
stlstp
Model files
8
Total size
3.9 MB
Largest file
1.6 MB

0 comments

See all