Skip to main content
F3D
Sentinel [Rook 2020 Toolhead] - Cụm đầu in Direct Drive 1

2 images

Ý Tưởng Khác

Sentinel [Rook 2020 Toolhead] - Cụm đầu in Direct Drive

By Kanrog

Downloads
349
Likes
56
Views
3,192
Remixes
1

Files 5 69.8 MB

  • Sentinel_pro_1764648210.stlSTL · 538.4 KB
  • Sentinel_1764648216.stlSTL · 532.8 KB
  • Nema_14_Clamp_1764648222.stlSTL · 96 KB
  • Sentinel_triangle_chc_1764648224.stlSTL · 557.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This is the Sentinel, a small, compact direct-drive printhead for the Rook 2020!

Uses a Creality heatsink and heatbreak (recommend all-metal) and a CHC or CHC-Pro for a super compact hotend. 

I've added a version for the Trianglelabs CR10 CHC that comes in the Fabreeko-kit, or you can get it from HERE  

Want ABL with an inductive probe? I got you covered!

Or maybe you want to use a BIQU Microprobe? Fear not!

Needs M3 nuts for the hotend and extruder, 4010 fans uses M2.5 screws.

It was designed for a Sherpa mini extruder, and works with the Sailfin if you use the sherpa-mount on it.

2x4010 blower fans and 1x3010 for cooling the heatsink.

Prints in one piece, no supports, PLA is perfectly fine for this, i recommend using the same settings as printing parts for your Rook.

Belts can be attached with zip-ties, or with Kyles belt-ties from HERE

I included a clip for your rails to prevent it from hitting the Z-idler in the back, and the Nema 14 strain-relief i use on my printers.

Assembly:
Screw the printhead to your carriage first, hook on the belts, then attach your hotend, 3010, 4010s and your extruder last.

Huge Thanks to “tcbp” and “lolthekidison” on the Rolohaun Discord for helping me test this!

Like my work? Support me on Ko-fi!

Read more Show less

Print spec

Formats
stlstp
Model files
5
Total size
69.8 MB
Largest file
68.1 MB

0 comments

See all