Giá đỡ thanh nhôm 2060 cho Camera Logitech C270

What it is: 

Its a webcam mount for X-Axis attachment to the 2060 extrusion - this mount cleverly positions the camera at the right position and height of the print head and will raise as the Z axis raises.

Remixed: 

I got the inspiration for this mount from DerBrinkman on Thingiverse: https://www.thingiverse.com/thing:4098521 but I wanted a different attachment than the M5  bolt his approach required.   So i remixed the arm to use a 2060 endcap attachment instead - it is a friction fit requiring no tools but it fits pretty securely on my Artillery Genius Pro.

Other slight changes are i used a hot melt M3 insert in the end for camera attachment with a M3x20 hex head bolt.  I had these hot melt inserts on hand and its a bit easier for me than dealing with unretained M3 hex nuts.

The focusing attachment for the camera itself is merely a make of this excellent design: https://www.thingiverse.com/thing:3081838 from Codiac2600

Setup for printing:

I sliced with Cura using Standard Quality 0.2 resolution with a profile optimized for my printer and setup.

Rafts no.  

Supports yes, two small tree supports for the backside of the 2060 endcap part of the model

Printed with 15-20% infill.  

Notes: 

This was purpose designed for use on an Artillery Genius Pro but i would guess it would work for any printer using 2060 extrusion on the X Axis.  The end cap design eliminates a bottom and backside “peg” from the facing edge because on my printer those two small areas are used by the z axis roller assembly.

Credits:

Sidewinder X1 Logitech C270 Webcam mount by DerBrinkmann
https://www.thingiverse.com/thing:4098521

Improved Logitech c270 Manual Focus System by codiac2600
https://www.thingiverse.com/thing:3081838