Skip to main content
F3D
Hỗ trợ và Hộp đựng XTouch (P1Touch) 1

4 images

Ý Tưởng Khác

Hỗ trợ và Hộp đựng XTouch (P1Touch)

Remix of Mount P1PTouch cho đế điện thoại P1P By Tackleberry_C_187840

By Pitax_1229381

Downloads
208
Likes
37
Views
1,494

Files 12 1 MB

  • Back_Cover_no_Screw_1767580512.STEPSTEP · 79.8 KB
  • Front_Cover_no_Screw_1767580513.STEPSTEP · 123.1 KB
  • Front_Cover_1767580514.STEPSTEP · 123 KB
  • Back_Cover_1767580515.STEPSTEP · 101.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#156784
Published

Description

I took the idea of Tack to have the touchscreen mounter in the phone hole, but I wanted it at a similar height of the original screen and also I wanted to hide the cable.

I found that you can power the touchscreen using the supplied connector  so I made a slimmer case with a hole in the back for the cable.

The stand was made on a P1S hole (dunno if the P1P is the same), which have 2 different heights inside for the lock mechanism, that's why the legs are different.
You can press the 2 sides to insert and remove the support, and should have the same hole as the other model.

In the end I found that with precise tolerance the back stands in and you don't need any screw, aniway i already did the screw version so I uploaded both just if someone prefers screws.

I printed it in PLA 0.2mm without any support, I suggest a higher infil for the support to increase stiffness (I did 40%).

Read more Show less

Print spec

Formats
stepstl
Model files
12
Total size
1 MB
Largest file
130.6 KB

0 comments

See all