Skip to main content
F3D
Vỏ quạt Raspberry Pi cho 4B 1
Vỏ quạt Raspberry Pi cho 4B 1
1 / 9

9 images

Dụng Cụ Tiện Ích

Vỏ quạt Raspberry Pi cho 4B

By jeepers01_100513

Downloads
67
Likes
14
Views
412
Download all (.zip)· 4 files · 2.1 MB· 2.1 MB

Files 4 2.1 MB

  • Pi_4B_Fan_Case_1765543678.stlSTL · 331.6 KB
  • Pi_4B_Fan_Case_Top_Cover_1765543680.stlSTL · 390.6 KB
  • Pi_4B_Fan_Case_STEP_1765543681.stepSTEP · 394.2 KB
  • Pi_4B_Fan_Case_Top_Cover_STEP_1765543682.stepSTEP · 1,021.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#156758
Published

Description

Compact ventilated fan case with 30mm fan.

Snap fit top cover screwless design.
Requires 1x 30mm 5V DC fan with fixing centres of 24mm.
The fan fits to the top cover with 4x 12mm M2.5 screws & nuts and connects to pins 1 (3v3)or pin 2(5v) and pin 9 (GND).

I have tried to make the case as small as possible so the Pi is a snug fit.
To install the Pi, angle it so as to engage the audio jack and hdmi sockets first then press the Pi down on to the 4x standoffs on the case bottom.

4x 8x3mm High silicone self adhesive feet stop the case sliding around.

I used supports for the sd card slot and hdmi's, usb C and rj45 sockets.

Printed in PLA at 0.2mm

I've included STEP files as well as STL to make it easier to modify if required.

Hardware
1x 30mm 5V DC fan
4x 12mm M2.5 screws & nuts
4x 8x3mm High feet

Hope the helps someone.

Read more Show less

Print spec

Formats
stepstl
Model files
4
Total size
2.1 MB
Largest file
1,021.1 KB

0 comments

See all

F3D uses essential cookies so the site works. Accept all also turns on marketing cookies for traffic and ad measurement; Essential only does not. You can change this in Cookie settings. Read the cookie policy