Khay xếp chồng Gridfinity Makpac có nam châm

I made this stackable tray to house all of my Gridfinity containers without having to rearrange them every time.

Each panel uses an 8 x 6 grid.

You can stack up to 2 containers at a height of 3 to be at the same height as the handle. Otherwise it can no longer be stacked.

I recommend always creating a height of 6 for stacking in the middle of the plate. So it cannot bend or brake.

-------------------------------------------------------------------------------------------------------

VERSION 2

I made a second version with a better handle to make it easier to remove the tray. There is also an undivided version of each for printing with a large print bed.

-------------------------------------------------------------------------------------------------------

Printing and Assembly

• choose the model you want
• print all the parts (don't forget the handle)
• glue the panels together
• insert the connectors (also use glue)
• install the ruthex inserts in the handle
• screw everthing together

(I first glued the panels together and then inserted the connectors)

I printed the tray in PLA and PETG with no problems

Required Components

• M3 ruthex (or same sized M3x5.7) inserts x8
• M3x12 screws x8 (M16 also work)
• M3 washers x8