Skip to main content
F3D
Hướng dẫn góc cho ống nước trong vườn 1

5 images

Đồ Gia Dụng

Hướng dẫn góc cho ống nước trong vườn

By remington

Downloads
402
Likes
386
Views
4,478
Comments
2

Files 3 179.1 KB

  • hoseroller-002_1765472037.stlSTL · 44.6 KB
  • hoserollerholder-001_1765472038.stlSTL · 63.8 KB
  • hoserollermount-001_1765472039.stlSTL · 70.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Similar to many commercial options, this model is a set of parts which are attached to the corner of an obstruction, be it a shed, a post or a building. The guide allows the hose to be run through it and has some play to prevent the hose chaffing on the corner.

BOM:

  • 8x brass panhead m4 bolts 10mm
  • 2x m4 stainless steel bolts 20mm
  • 4x m4 stainless steel nuts
  • 8x m4 stainless steel washers
  • 2x m4 stainless steel bolts 30-40mm
  • up to 6 m4 fasteners to attach to your obstruction (not detailed here).

Recommended print settings:

  • 3-4 walls
  • 10-15% infill
  • tree supports on the mount
  • auto align the rollers

Construction:

  1. Slot in 2 brass bolts per roller, space the bolt heads out from the roller body, wide enough to sit into the slots in the roller holder.
  2. Repeat the slotting in process for all the rollers
  3. Place the 2nd half of the roller holder over the top and bolt two 20mms, washers and nut to secure the two holder halves together - choose 2 bolt holes next to each other.
  4. Slot on the mounts over the two empty bolt holes on the roller holder assembly.
  5. Thread the longer 30-40mm bolts through the mounts and holder assembly with washers, tighten it all down with the nuts
  6. locate against your obstruction and use the mounting holes to secure it with whatever fixing you're using.
  7. thread your hose through the center hole.

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
179.1 KB
Largest file
70.7 KB

2 comments

See all