Skip to main content
F3D
Một bộ dẫn cáp umbilical khác cho Voron 2.4 1

2 images

Large file collection Ý Tưởng Khác

Một bộ dẫn cáp umbilical khác cho Voron 2.4

By fbeauKmi_520984

Downloads
741
Likes
171
Views
5,721

Files 39 22.1 MB

  • umbilical_holder_top_extrusion3030_mount_1765704335.stlSTL · 1.6 MB
  • umbilical_holder_top_extrusion3030_mount_bowden_1765704336.stlSTL · 1.7 MB
  • umbilical_holder_bottom_extrusion3030_mount_1765704337.stlSTL · 829.1 KB
  • TPU_cable_mount_x2_5.5mm_x2_1765704338.stlSTL · 220.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#153724
Published

Description

Another toolhead umbilical for Voron 2.4

Here's the second version of my umbilical mount. This version was designed in collaboration with @stephzic.
 

This is the previous version ^^

Current version during developpement
Courtesy of @stephzic

How does it differ from the mount on the A motor?

Initially, this design was not intended for CANbus, but a 16-wire cable. However, a CAN cable can be used perfectly well. The 2 parts of the mount hold the cable taut between the top and bottom extrusions. The cable then enters the electrical cabinet next to the Z chain.

Pros:

  • the cable does not interfere with the bowden tube when the carriage is in the up position
  • the mount is suitable for all cable diameters (4.5mm to 10mm)
  • the cable does not run alongside the steppers (limits EMI)
  • rear panel remains easy to remove

Cons:

  • haven't found any yet ^^

Changelog

  • V1 : initial version
  • V2 :
    • Stronger top holder,
    • review geometry,
    • maintain clamp in place,
    • allow to use most exhaust cover,
    • suitable for 4.5 to 10mm cable dia,
    • add a bowden guide (by @stephzic),
    • review bottom holder geometry to suit No-chain mod (to come)

Printed parts

The main parts are printed in ABS with VORON specifications (40% infill, 4 perimeters, ...). The cable-holding inserts are made of TPU95A (tested for several months without issue in a 65°C chamber). An ABS version of the insert (untested yet) is available in STLs.

Bill of materials

Hardware

Qty

notes

M3x16 BHCS

2

M5x10 BHCS

2

M3x4x5 heated insert

1

M3 square nut

1

DIN562

M5 T-nut

2

F623RS Bearing

2

for bowden guide

M3x20 BHCS

1

for bowden guide

M3 hex nut

1

for bowden guide

Assembly instructions

Top holder

(Optional bowden holder)

Mount this assembly on the center of the top rear extrusion with a M5x10 screw

Bottom holder

DO NOT mount it on the gantry !
Mount this assembly on the center of the bottom rear extrusion with a M5x10 screw.

Use TPU or ABS insert in the holder according to your cable diameter.

Notes on Umbilical cable

As umbilical, I use a 14-wire harness from LDO + 2 22AWG wire, MDPC-X Medium cable sleave and heat shrink. All together it measures 8 mm in diameter

Associated mods

CAD file 
see https://github.com/fbeauKmi/V2.3934/tree/main/mods

Aknowledgements

@stephzic for the great help on the developpement of this mod and his contribution. bowden guide was inspired by Galvanic bowden tube guide

Many thanks to the French Voron Community to support me everyday ^^

Read more Show less

Print spec

Formats
stepstl
Model files
39
Total size
22.1 MB
Largest file
1.8 MB

0 comments

See all