Khay đôi Gridfinity cho HDD USB có khay phụ cáp

A 1x3 Gridfinity bin for two USB HDD with a small attached sub-bin for cables. Designed to suit various hard drives (the shiny one is slim but larger than a simple 1x2 standard bin).
I have only tested it with 2 hard drives though (an old 512 Go WD MyPassport HDD and a new 5 To WD MyPassport HDD) as seen on the photos, the max HDD case size is 88x19.3mm.

The HDD bin is 9u in height but without a lip. The attached cable sub-bin is 7u in height without a lip too.
The wall width is only 0.8mm, as it suits perfectly a 0.4mm nozzle and is plenty strong for the application. Don't hesitate to ask me for other values as it's quite easy to recreate.

This design was created using the GridfinityGenerator for Fusion360 by Le0Michine and further modified to suit this particular use case.

This design is part of the Gridfinity open-source project initiated by Zack Freedman.