Hộp Shelly v2 + Phụ kiện

Case for Shelly Plus 1PM & Shelly Plus AddOn

Without Shelly add-ons, please use Shelly Case v2.
Parts with the same name are identical.

The housing is used to securely hold a Shelly Plus 1PM device and a Shelly Plus AddOn.

The housing creates a safe separation between the high-voltage area and the low-voltage area (sensors). 

Up to four sensors can be connected, e.g. temperature, humidity, digital and analog sensors. Please refer to the add-on instructions for the exact number.

Consists:

• 1x housing (bottom part)
• 2x separator
• 1x lid
• 2x clips for cable clamping
• 2x cable kink protection (optional, see below)
• Clip for closure (high voltage)
• Clip for closure (low voltage)

Assembly

Connect Shelly Plus 1PM and Plus AddOn and insert into the housing
 

Connect high voltage area

Insert separator

Connect low-voltage area (sensors).

Close the housing

This requires:

• 4x cylinder screw DIN912 M4x20
• 4x nut DIN 934 M4
• 4x countersunk screw M2x16 (or similar)
• 2x kink protection KM4 (optional)
  • Inner diameter approx. 6.4mm
  • Waistband 9.5 x 2.4
• max. 2 Wago clamps 221-413
• max. 2 Wago clamps 221-412

Wall mounting:

a) simple mounting plate:

• Fit the mounting plate with 4 nuts (M4).
• Screw the mounting plate onto the wall (2-4 M5 countersunk screws)
• Now screw the complete housing to the mounting plate (M4x25)

b) with wall mount:

• First attach the wall bracket to the wall.
• Screwed with 2-4 M5 countersunk screws
• or with adapter clips, e.g. for magnetic attachment

Adapter clips:

• for magnetic attachment
  for disc magnets 10x3, please pause printing and insert
• Adapter for qube-500 pc case see here
• .... more are in the works
• to create your own adapter clips: ShellyV2_adapter_base.stp

Printing Notes:

all parts printable without support structure

Please pay attention to the alignment when printing these parts:

ShellyV2_mounting_plate_v2_high.stl    

ShellyV2_adapter_……..stl  

Update! Remix now available

I've now enabled Remix for this 3D model!
The necessary step files have been uploaded and can be used as desired.