
Thùng rác để bàn V2 cho bàn IKEA ALEX
- Downloads
- 153
- Likes
- 21
- Views
- 710
- Remixes
- 0
- Comments
- 8
Files 4 4.7 MB
- Bin37_1765664507.stlSTL · 1.2 MB
- Bin35_1765664508.stlSTL · 1.2 MB
- Bin33.5_1765664509.stlSTL · 1.2 MB
- Bin26_1765664510.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #152130
- Category
- Máy In 3D
- Published
Description
I recently bumped into my old desk bin and snapped one of the arms off… So I figured it was time to revisit the design.
The original model was an attempt to faithfully reproduce the design it was based on, but this time around I decided to simplify the shapes. I made the arms wider and thicker so they should hopefully survive any future bumps. I also made the gap below the arms 2mm taller, since I upgraded to a much thicker protective covering for the desk (the old bin was a very tight squeeze). Both versions are provided — Bin35 with a 35mm gap (if you don't have a protector on your desk, or a very thin one) and Bin37 with a 37mm gap (for thick protectors like mine).
If you need a version for a different desk thickness, leave me a comment.
Update 2024-07-01: added a version with a 26mm gap.
Update 2024-10-20: added a version with a 33.5mm gap.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 4.7 MB
- Largest file
- 1.2 MB
8 comments
You may also like 12 models
See all-

-

-
New -
New -

-
New -

-

-

-

-

-


