
Tấm Gắn Adapter MIK Cho Xe Đạp
- Downloads
- 202
- Likes
- 20
- Views
- 1,373
- Remixes
- 0
- Comments
- 0
Files 3 1.2 MB
- MIK-Adapter_1766360278.stlSTL · 476.2 KB
- MIK-Lock-Slider_1766360279.stlSTL · 705.5 KB
- MIK-Position-Block_1766360281.stlSTL · 12.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #148525
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
I made this MIK adapter plate for using my motorcycle tank pouch on the e-bike. However you can use it for your own luggage which has to be screwed on the adapter plate.
Additionally 5 screws 20mm x 3,5mm are needed for the position blocks and for the lock slider. A spring 10mm x 40 mm is needed for the lock slider (can be smaller- simply use what is available).
There are 4 little pockets next to the position blocks which i used for rubber blocks (hot glued into the pocktes). The holes in the adapter plate on the published pictures have been removed to save printing time!
Don't use loads above 5 kg with this adapter!
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.2 MB
- Largest file
- 705.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


