Skip to main content
F3D
Dụng Cụ Thay Lọc Cho Máy Lọc Nước Drufi DFR 1

2 images

Đồ Gia Dụng

Dụng Cụ Thay Lọc Cho Máy Lọc Nước Drufi DFR

By H3dSprint

Downloads
34
Likes
4
Views
465

Files 1 215.3 KB

  • tool_drufi_1765532118.stlSTL · 215.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

To use the printed tool, I recommend a pipe or a shaft with a diameter of 16mm out of stainless steel or any other metal material.

Part list:

  • printed ring | quantity: 1
  • printed fixing plate | quantity: 2
  • pipe or rod ⌀16mm | length: ≥200mm
  • cylinder head screws M4x25 | quantity: 4
  • hexagon nuts M4 | quantity: 4

Print instruction:

  • material: ASA or PETG 
  • supports: can be printed without support
  • layer height: 0,2mm or 0,3mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: not required
  • enclosure: recommended

Assembly instruction:

  1. deburr parts if needed
  2. add hexagon nuts M4 (3x) to fixing plates
  3. insert pipe to ring
  4. assemble fixing plates by using cylinder screws M4x25 (4x)

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
215.3 KB
Largest file
215.3 KB

0 comments

See all