
Giá đỡ ống nước vườn dùng cuộn chỉ in 3D
- Downloads
- 70
- Likes
- 7
- Views
- 974
- Remixes
- 0
- Comments
- 0
Files 9 6.8 MB
- hose_holder_print_position_1766343955.stlSTL · 1 MB
- Hose_Holder_Larger_1_Piece_1766343956.stlSTL · 1.2 MB
- hose_holder_LARGER_1_piece_1766343957.stepSTEP · 167.6 KB
- Hose_Holder_Larger_1_Piece_1766343958.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #141529
- Category
- Đồ Gia Dụng
- Published
Description
This is sized to work ideally with Hatchbox spools which are ~68mm outside to outside. Will also work with many others that are close (~+/-5 mm). It is shown on a no-name brand spool that was ~64mm wide. Spools will flex a bit so it doesn't have to be perfect. I match drilled and used #6 wood screws to attach to spool.
Print instructions
Category: Outdoor & Garden Print Settings
Supports: No
Notes:
I printed mine using petg with 2 perimeters and 15% triangular infill and that seems ok. If you use pla you may want to go a bit thicker. I used 90g of filament.
Update 2/3/2024: Added new version that prints in one piece -“Hose Holder Larger 1 Piece". This fits on most printers but it will hold a lot of garden hose. Has coin anchors in the model to help it stay on the bed. Just cut them off when done. I used nylon when I made mine. I included the Fusion file as well.
Print spec
- Formats
- f3dstepstl
- Model files
- 9
- Total size
- 6.8 MB
- Largest file
- 1.2 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


